Chilli - Fader

Archive

Shaped and Designed by James Cheal

Welcome your new model to fit the much needed 5 fin round tail board in the quiver. Fresh with a thumb tail (not too wide for bigger stuff and not too pinny for the smaller stuff, a perfect balance), very fast outline with no break, all drive and speed for this one.

With a new rocker changing the sweet spot allowing you to get up in the trickiest take offs and be smack bang on target for the whole wave. This board works really well in the pocket. We kept a single concave in the mid section, allowing it to hold through turns when your out on the face. Just behind the back fin it goes to a flat bottom for release and an easy transition from rail to rail.

Complete with a 5 fin set up, makes it well rounded in all conditions. With the new FCS II system we have found the Performer template to well in the pocket and Carver template for down the line drive. In Futures we found the JJF template to work best in the pocket and the AM2 template for drive.

Accompanying the Fader will be The Fader Step Up in a pin tail.


Board Features

Tail:

Thumb Tail

Rail:

Low Rail

Fin Setup:

FCS 2x 3 Fins

 

SUITABLE SKILL LEVEL

SUITABLE WAVE SIZE

Fader Standard Dimensions

Size Width Thickness Volume
5'8" 18 3/8" 2 1/8" 22.50 Custom Order
5'9" 18 1/2" 2 1/8" 23.10 Custom Order
5'10" 18 5/8" 2 3/16" 24.50 Custom Order
5'11" 18 3/4" 2 1/4" 25.80 Custom Order
6'0" 18 7/8" 2 3/8" 27.00 Custom Order
6'1" 19" 2 7/16" 28.30 Custom Order
6'2" 19 1/8" 2 1/2" 29.40 Custom Order
6'3" 19 1/4" 2 9/16" 30.60 Custom Order
6'4" 19 3/8" 2 5/8" 31.90 Custom Order
6'5" 19 3/8" 2 5/8" 32.30 Custom Order
6'6" 19 1/2" 2 5/8" 33.00 Custom Order
* Standard Tail

Be the first to Know

Shop Locator

Find Shop

Ask Chilli

Here